Building Wood Stair Railing

Posted on Living Room & Decor

Wood stair railing – If you have stairs inside or outside a house old, these steps should have handrails. Railings provide support when you walk down the steps and provide a protection that prevents people from falling edge of the stairs. You can build the rails to almost any staircase in an old house with some tools and equipment base, to ensure that your stairs are safe.

May also interest you  Best Kids Air Hockey Table

Wood stair railing, make the upper and lower cutting railing posts poles 4 × 4 inches (10 × 10 cm) or two posts 6 x 6 inches (15 × 15 cm) to about 40 inches (1 m) long. Supporting the first support pole against one side of the ladder, known as the crossbar, on top of the stairs where the rail begins. Allow 4 inches (10 cm) from the bottom of the wooden beam are below the level of the step against the crossbar.

May also interest you  Solar Landscape Lighting

Wood stair railing, using a drill bit of ½ inch (1.25 cm) and make four holes through the bar into the wooden pole. Punch holes in a square pattern, about one inch (2.5 cm) edge. Drill about 2 inches (5 cm) deep inside the post. Bolts placed 4 inches (10 cm) across the rails in the post to secure. Continue with the bottom of the stairs. Hold the second post at the bottom of the stairs as you did on the top rail. Drill the pole and attach it to the stairs with bolts

May also interest you  Counter Stools With Backs