DIY Invisible Shelf With Metal Unique Bookends

Posted on Bookends

Place a check mark in the center of the stud between the two brands. Delete both points on the edges of the tap, the single staying. Press the bookend to the wall, then drawing the holes up with the marks on the wall. Repeat with the remainder of, placing them anywhere on the wall you want.

Let the ruler in the midst of a bookend. Drill holes at the two marks by using the drill and metal drill. Place the component of the publication support with the mark on the wooden block so that the markers facing upwards. Repeat with the remaining unique bookends. Locate a stud in the wall for hanging the shelf. Move the stud finder horizontally on the wall at the height you have selected for the projected shelf. Mark the stud with the pencil. This is 1 side of the tap. Move the stud finder in the exact same way until you find the opposite end of the beam, and mark it with a pencil.

May also interest you  Airplane Bookends

Unique bookends – Invisible bookshelves offer the appearance of floating in the air. What’s hidden is a metal stand which is smaller than the publication. The book’s covered and hides the shelf. A lot of companies make undetectable bookshelves, but making them at home requires simply drilling a few holes and screws. Lay of books on the base of the bookend on the wall until it’s completely covered.

May also interest you  Lion Bookends

This gallery is about unique bookends.