A round pedestal dining table offers everyone a place to sit with the ability to see each other, but who is to sit on the legs have a meal less comfortable. You can solve this problem by making a stand for your round table, which will allow everyone to have space for their legs. This project requires only a few tools and materials, and can be completed in an afternoon.
Cut the plywood circle 1 inch (2.5 cm) with the saw. The diameter should be three quarters the size of the table, and will be the base of the pedestal. Place the metal flange 3 inches (7.5 cm) in the center of the round pedestal dining table base. Make marks on the screw locations with a pencil. Make drill pilot holes with 1/16 in each pencil mark. Sand the entire surface of the plywood with 120 sandpaper to remove any imperfections left by the saw or drill.
Flange screwed to the round pedestal dining table base with screws 1 inch (2.5 cm). The thickness of the flange will prevent the screws out the other side of the plywood. A second flange positioned in the center of the table at the bottom and mark the holes for the screws. Drill pilot holes in the pencil marks, being careful not to cross the table. Screwing the second flange to the bottom of the table, using screws that go with the thickness of the table. Again, the thickness of the flange will prevent penetrate the surface of the table. Set aside the table for now.
This gallery is about build round dining table, how to build a round dining table, pedestal round dining table, round pedestal dining table, round pedestal dining, pedestal dining table, round pedestal, dining table, pedestal dining.