How To Hang A Pool Table Lights

Posted on Pool Tables

Pool table lights – A pool table light should light up the entire table so that the shooter can see the tracks, pillows and arrows guide points and still have loads of room to take. Lights for pool tables, intended to light only the surface of the pool table and no room , must be placed correctly to accommodate each different table. Hang a light table correctly will ensure nobody play is influenced by poor lighting.

May also interest you  Pool Table Slate

Hang a pool table lights, Use the arrows on the paths to discover the center of the table for the length and width. Use open-ended hooks screwed into the ceiling to anchor the light bar on the roof. Place each string to a hook (or string if a light individual string is used). Measure the distance from the tabletop to the bottom of the light. You have to have light at least 30 centimeters (40 inches for standard pool) above the table. This will provide the best lighting for play.

May also interest you  Antique Pool Tables

Use a level to ensure the light is level by placing on the ceiling to get. Count the string loops on each side. Then set the level in addition to the light to be certain that the light is flat; if not, then your ceiling rings are irregular and need adjustment. This measure is the most important for the lights using two strings instead of one.

May also interest you  Slate Pool Table

This gallery is about pool table lights.