Queen sleeper sofa – To calculate the necessary fabric to upholster a sofa bed queen, aims to buy enough fabric, as well as a 10 percent additional for future repairs or accessories. It is useful to learn the names of different parts of the sofa and to understand how to measure this part. Make the pattern for a simple scale using graph paper. Upholstery fabrics printing with the upper part of the pattern perpendicular to the edge (ultimate) selvedge, extending the wheat. This allows the length of the piece of cloth should be placed horizontally along the inside of the back of the sofa, for example, the pattern in the correct position (as a comparison, the pattern on the fabric is a fabric printed parallel to the selvedge edge so that the pattern will be in the correct position on the vertical panel long, curtains).
Measure the sofa and burn them as all for long. For example, measure the inside of the back of the inside of the arm of one to another and record this as the width. The length of this piece is a measure of the top of the bed down (toward the floor) in the back to the bottom of the queen sleeper sofa. Reaching out to between the mattress and the back to the bottom of the sofa for inside measurements. Measure the outside of the back of the wide side of side and from the top to the bottom of a long sofa.
Measure the width of the arm measurement from the front to the back of the arm; the length is measured from the edge of the lower part of the queen sleeper sofa, over and over again and down arm in arm by the sofa. Record these measurements twice; once for each arm. Measure the width of the front rail as the width of the front of the sofa and long as measures of the bottom bed, beyond the front of the rail and the bottom inside edge of the bottom of the sofa. Note the size of the top, bottom and boxing for each bearing. Boxing is a piece of fabric sewn around the pillows that creates depth. Record the width of the piece is as long as a pillow and perimeter measurements of the thickness of the pad.