Refinishing A Butcher Block Countertop

Posted on Kitchen & Dining Room

Use a tack cloth to remove dust after each pass of glue.  If the dust is not removed, the finish of your butcher block countertop for the sake of their counter have an end was bumpy wreck.  Apply mineral oil to the work surface with a sponge or cloth.  Wait until the mineral oil is absorbed and then apply the following coating.  If the  does not consume more oil, wipe off excess oil with a dry cloth.  Cover the counter with a layer of beeswax.  Beeswax help fill out the pores and poor finishing.Apply 1 or two layers of wax with a clean cloth and let dry.  Pula counter softly with a dry cloth when beeswax remains dry.  Reapply mineral wax and beeswax to their tops on a monthly basis to be able to maintain the finish.

May also interest you  Wall Mounted Pot

Refinishing a butcher block countertop does not have any special abilities or expertise and can be achieved in only a few hours, leaving your desk looks better than ever.  Sand work surfaces using a shredder to remove stains or scratches on the surface.  Start with the roughest sandpaper.  Such as countertops become thicker, work the best way to sandpaper finer grain.  Make sure you modify the sanding pad once the pad is covered with old mineral oil or dirt.

May also interest you  Make A Dining Table

This gallery main ideas butcher block countertop.