Repair Spilt Butcher Block Counter Tops

Posted on Kitchen & Dining Room

If the dust is not removed, the finish of your butcher block counter tops  for the sake of their counter have an end was bumpy mess.  Apply mineral oil into the work surface with a sponge or cloth.  Wait until the mineral oil is consumed and then apply another layer.  If the  does not consume more oil, wipe off excess oil with a dry cloth.  Cover the counter with a coating of beeswax.  Beeswax help fill out the pores and bad finishing.Apply 1 or two layers of wax with a clean cloth and let dry.  Pull counter softly with a dry cloth when beeswax is still dry.  Reapply mineral wax and beeswax to their tops on a monthly basis to be able to maintain the finish.

May also interest you  Retro Kitchen Table

Refinishing a butcher block counter tops does not have some special abilities or expertise and can be done in just a few hours, leaving your desk looks better than ever.  Sand work surfaces using a shredder to remove stains or scratches on the surface.  Make sure you change the sanding pad when the pad is covered with old mineral oil or grime.

May also interest you  Kitchen Cabinet

This gallery main ideas butcher block counter tops.