Retaining Wall Blocks

Posted on Designs

The concrete masonry units are available in various sizes and are an effective, permanent means of building structures under care. The fundamental design of a retaining wall made of concrete blocks depends on tangible Cement sparks, known as”base”, which defines the base level of the upper structure of concrete block wall. The basic procedure for installing one containment wall of concrete blocks can be adapted to a wall of almost any period and –Retaining Wall Blocks.

May also interest you  Countertop Dishwasher

Install a poured  retaining wall blocks concrete foundation for the retaining wall. According to the web site of Dixieland Pro Build, the base must be at least 12 inches wide and 8 inches deep, and always leveled the entire length of the embankment. You must depart the foundation hardens at least 48 hours before beginning the construction of the concrete wall

May also interest you  Butcher Block

To remove dirt thoroughly clean the top surface of the base with a broom.Defines line from the wall to the concrete blocks with a hammer nailing, steel or wood stakes at each end of the location of this retaining wall, located approximately 3 feet beyond the ends of the wall. Make sure the stakes are perpendicular and secured enough to securely hold that depth.

May also interest you  Retractable Screen Doors

This gallery is about retaining wall, retaining wall blocks.